Letterbox Engraving Service

No, we do the engraving part, you get the item powder-coated yourself.

Almost any size. We have a 1200mm wide automated sandblast engraver, so 1200 x  any length. If your panel is wider than 1200mm, we do have other tools to cater for this. We need to determine what you want engraved so we can provide the best solution.

Almost any powder-coated surface can be engraved with excellent results. In rare cases, certain plastic-based powder coatings may leave a slight heat residue during the process, but this is uncommon.

To ensure the best outcome, we always recommend running a test on your product before full production. Providing us with a sample piece allows us to confirm that the coating responds as expected and ensures your final engraving meets the highest standard of clarity and durability.

We use either laser or sandblast engraving. Mostly, we used sandblast engraving. This is done using a photopolymer stencil, which creates an exact and fine detail mask for quality engraving. 

Once the engraving is done, we normally paint and fill the area to any colour requirement using high-quality epoxy enamel.

We engrave just below the surface, which is sufficient for paint filling and an engraved look. We don't go all the way through, as this would interfere with the continuous bond onto the metal, which may then cause a weakening of the bond. Always take special care of your products.

Absolutely. We can etch text, logos, detailed artwork, and even photographic images into powder-coated surfaces.

Yes, we offer PMS colour matching to achieve accurate brand or project-specific colours.

The timeframe depends on the complexity and volume of the job, but our team works efficiently to meet your deadlines. On average, most powder-coated engraving projects are completed within 5–10 business days. If you have an urgent requirement, let us know and we’ll do our best to prioritise your order.